ABB ACS580 series AC Inverter for 2.2kW (3HP) 400V 3 Ph motor to 5.6A at high overload or 3kW (4HP) to 6.8A when Fan/Pump rated. Operates in VxF, Sensorless Vector or Full Closed-loop Flux Vector (when an optional Encoder Feedback card is fitted). Converts fixed frequency Three Phase 400V input to variable frequency 400V to control the speed of a standard AC induction motor.
Size R1: 125mm Wide x 223mm Deep x 330mm High (glandbox is integrated). IP21.
Overload: 150% x 60 seconds every 10 minutes (High Overload)
Overload: 110% x 60 seconds every 10 minutes (Fan/Pump rated)
Speed Control Range: 0-500Hz.
Braking: To 52 Ohm minimum, 140 Ohm maximum external resistor to 3.9kW (not supplied)
Operator Keypad (Assistant Control Panel)
2 Analogue Inputs, 6 Digital Inputs, 2 Analogue Outputs, 3 Relay Contact Sets, terminals for RS-485/Modbus RTU communications, terminals for dual channel SIL3 safe torque off (STO), 24V AC/DC input to power the control unit when the main supply is disconnected.
Input Current: [as output current]
Input Voltage: 380-480V Three Phase +10% -15% at 50-60Hz ±5%
Unless specifically stated Drives Online Ltd is not approved or sanctioned by all manufactures or trademark listed. We are not an authorized distributor, reseller or representative for all manufactures listed on the website. Designated trademarks, brand names, literature, images and brands appearing herein are the property of their respective owners.